Welcome to Airpart - Min Order: £10.00

Airpart Supply Ltd are a Factory Authorised Dealer for FLARM Technology Ltd

What is FLARM?

FLARM is the collision avoidance system and traffic awareness technology used by General Aviation and UAVs. Aircraft with a FLARM system issue visual and aural warnings when on a collision course with another aircraft.

FLARM uses GPS and digital radio broadcasts to communicate with other aircraft. Many FLARM devices also incorporate an ADS‑B and transponder receiver. This enables aircraft that are not yet equipped with FLARM to be detected as well.

FLARM is recommended by many aviation authorities and organizations. Over 40,000 manned aircraft, or 50% of General Aviation in Europe, already have a FLARM-system installed.

READ MORE ABOUT POWERFLARM AND POWERFLARM DEVICES HERE

 

For pricing and availability click the relevant part number and options below. Units and options must be ordered at the same time, on the same PO for quoted pricing to remain.

 

PowerFLARM Devices CORE PURE CORE ADS-B PORTABLE ADS-B Notes
  ●  Included ○  Optional  
Part number, E-version FLAPFD11E FLAPFC11E FLAPFP24E The E-version works in Europe, Africa and New Zealand
Part number, A-version FLAPFD11A FLAPFC11A FLAPFP24A The A-version works in North and South America, Australia and Israel
Integrated display      
Built-in GPS Antenna      
Second FLARM Receiving Antenna For option: Core Pure, Core ADS-B & Portable ADS-B devices are supplied with an internal antenna - Internal PN: ANTCIFLAEU (E-Version) or ANTCIFLAUS (A-Version). It is recommended for the Core Pure and Core ADS-B units that an external antenna is fitted PN: ANTCEFLA. It is possible to install an external antenna for the Portable ADS-B but this would affect is portability. Core Pure and Core ADS-B devices require an activation license for the additonal antenna PN: LICRFB. License included for Portable ADS-B device.
Option to run on batteries (6 AA; not included)      
SSR 1090 MHz Receiver (Mode A/C/S)    
ADS-B 1090 MHz Receiver    
USB port for data readout and updates    
microSD Card slot for data readout and updates      
Data port #1, 8P8C/RJ45  
Data port #2, D-sub DE-9    
5V 500mA output for ext. devices (on USB port)    
External Audio Output      
IGC Flight Recorder Approval Up to and including Diamonds
Engine Noise Level (ENL) Recording Option PN: LICENL. This option requires OGC Flight Recorder Approval. Portable ADS-B device requires purchase of PN: LICIGC in addition to PN: LICENL
Obstacle Database with Warnings Option available for selected regions only - see part notes under 'Licenses & MCA Section' below. Obstacle Database PN: OBSDBASE
EASA Minor Change Approval (MCA) Option applicability as follows: Gilders use PN: MCAELA2G, Motor Gliders use PN: MCAELA2MG, Powered Airplanes use PN: MCAELA2PA - Please check applicability/approval availability prior to ordering

Licenses & MCA

License Part number Notes
Activate Second FLARM Receiving Antenna LICRFB License only. Core Pure and Core ADS-B devices require this activation license for the additonal antenna. License included for Portable ADS-B device.
IGC Flight Recorder Approval LICIGC Up to and including Diamonds
Engine Noise Level (ENL) Recording LICENL This option requires OGC Flight Recorder Approval. Portable ADS-B device requires purchase of PN: LICIGC in addition to PN: LICENL
Obstacle Database OBSDBASE Obstacle Databases available as of Feb 2020 are as follows: Austria/Slovenia, France, Germany, Italian Alps East, Italian Alps West, Switzerland, UK & Ireland and European Alps - Please advise which is required in the order notes at the time of order or contact us for more information
EASA Minor Change Approval (MCA) – Gliders MCAELA2G Please check applicability/approval availability prior to ordering
EASA Minor Change Approval (MCA) – Motor gliders MCAELA2MG Please check applicability/approval availability prior to ordering
EASA Minor Change Approval (MCA) – Powered airplanes MCAELA2PA Please check applicability/approval availability prior to ordering

Additional Products & Services

Accessories are included with the PowerFLARM shipment and do not have to be ordered separately. The exceptions are an additional internal FLARM antenna which is needed together with the LICRFB license and external antennas.

Part Part number
CORE, internal antennas  
GPS Antenna ANTCIGPS
FLARM Antenna E-version ANTCIFLAEU
FLARM Antenna A-version ANTCIFLAUS
ADS-B Antenna E- version ANTCIADSBEU
ADS-B Antenna A-version ANTCIADSBUS
CORE, external antennas  
FLARM Antenna AV-75, CORE, External ANTCEFLA
PORTABLE, internal antennas  
FLARM Antenna E-version & A-version Port B ANTPFLASMA
FLARM Antenna A-version Port A ANTPFLARPSMA
ADS-B Antenna ANTPADSB
Accessories  
PowerFLARM Core D-Sub DE-9 display data connector ACCDSUBDE9
PowerFLARM Core USB panel mount data cable ACCUSBEXT
PowerFLARM Portable Power supply ACPPWR
<<<<<<< HEAD ======= >>>>>>> dev